IntraAction Technology Europe 
intraactioneurope002005.gif
Return HOME
INQUIRIES 
 
We would be pleased to provide a fully detailed quotation for your custom designed membrane switch panel, keypad or graphic overlay. Even if your requirement is only at the concept stage and you have not yet got any drawings, we would be pleased to provide a quotation against your written specification; if you are unable to provide AutoCAD or Corel Draw files; the minimum information we require is as follows:-
 
* Flexible or Rigid [refer to DESIGN page];
* Size; mm x mm;
* Lenghth of connecting Tail & track pitch [if known];
* With or without crimp connector;
* Number of colours; [Black & White are colours]
* Number of switches [tactile or non-tactile]
* Number of Display windows;
* Number of Embedded LED's
* Number of LED windows;
* Number of Holes;
* Number of Cut-Outs;
* Embossing;
 
Email your inquires to
IntraAction Europe
for a Low Cost
&
Fully Detailed Quotation; 
STANDARD SPECIFICATIONS; 
 
The following are the standard specifications, however, if your requirements fall outside these parimeters then we are confident we will be able to provide a custom membrane solution.
 
* Circuit Resistance:              150 Ohms Max;
 
* Switch Stroke - Non-Tactile; 0.1 to 0.5mm;
 
* Switch Stroke - Tactile:         0.6 to 1.5mm;
 
* Maximum Voltage:              24V DC;
 
* Maximum Current:               5Ma DC;
 
* Operating Temperature:      -20c to +70c;
 
* Operating Force:                  300 to 1000grams;
 
* Life Expectancy Non-Tactile: 5 million;
 
* Life Expectancy Tactile:         2 million+;
 
* Humidity:                               95% RH non condensing;
 
* Contact Bounce:                  1.5 - 5 ms;